1.1 INTRODUCTION

Selector switches are available in 2, 3, or 4-position versions, and are often used when more than one control option is needed. In general, the centre position of the selector switch is the starting cam position. Left position presses the left plunger in the selector switch. Turning the selector switch to the right presses down the right plunger. Bright LED illumination is clearly visible in daytime scenarios that feature strong sunlight as well as other low-light conditions. The easily identifiable switch positions also enable safe and intuitive operation.

1.2 USES

Indicating lights tell us what the machine is do or failing to do. When a light is connected to a machine process, and the light is on, the machine shows that it's working. These actuators are available in round or square shapes and with raised or flush designs. They also offer the option of a short or long lever. Optional illumination in red, green, blue, yellow or white is offered, and all colour variants are available with operating voltages of 24VDC to 240VAC.

Specification

Mechanical Life                                        : 100,000 (Single Contact)

Operating Temperature (AB/AG)           : -20~+55°c

Operating Humidity                                  : 45~85%

Store Temperature                                   : -45~+85°c

Store Humidity                                          : Below 95%RH

Insulation Resistance                              : Over 100M (500V DC Megger)

Electrical Life                                            : 100,000 (Single Contact Point) , 50,000 (Double Contact Point)

Degree of Protection

In Front Panel      : IP65(IEC 60529)

Terminal               : IP20(IEC60529)

Dielectric Strength

Contact Block         : 2,500VAC/Minutes

Indicator Light        : 2,000VAC/Minutes

Vibration Resistance

Mal-Operation          : 5~55Hz single amplitude 0.5mm

Durability                  : 30Hz single amplitude 1.5mm

Shock Resistance

Mal-Operation          : 100m/s²

Durability                  : 1,000m/s²

Note:

Without lamp, need buy LED bulb to become a complete set.

Can be mixed with other selector switches series,s

Each model mus be order at least 10 units.

When the total purchase volume of mixed's model reach 500 units or more, according to the proportion of individual models to get condition of buy 10 get 2 free.

**INCLUDE INVOICE**